DIY UNCLE SAM DECOR HANGER

Hey there!  Welcome to Decorate and More with Tip! Here on my blog I share how you can decorate your home on a budget.  I share budget friendly decorations by creating it from scratch, revamping, re-purposing or giving it a makeover with easy tutorials.  I hope I inspire you to create something beautiful for your home. 🙂

Today’s is the 10 on the 10th Blog Hop, I am joining 8 talented bloggers who gets together on the 10th of the month to share our ideas for under $10. This month’s theme will be Red White and Blue!  If you are coming over from Jodi at The House House what did you think about Jodi’s straw décor?  I am going to have to try that craft myself!  At the bottom of my page I will have all of the blogger’s red, white and blue inspiration for you! 🙂

This post may contain affiliate links. Click {{HERE}} for full disclosure.

For my craft I am going to make an Uncle Sam garden flag.  I decided to pull 6 of my extra blind slats to do this DIY, but you could use several different other items, you could use wood slats, wood shims or even paint stir sticks.  If you don’t have blind slats and like my idea, check your local thrift stores I have found blinds for our daughter’s home for $5.  You can make several crafts out of a whole blind.  I shared several DIYs with them.  You can check them out here – BLIND SLATS DIYS.

Using the extra PVC blind slats for a garden flag would prevent wear and tear from the weather.  I am using 6 slats for this project.  Let’s get started with the cute July 4th garden flag.

Taking 6 blind slats and cutting 10 pieces from them.

  • Four 8 inch slats
  • Four 14 inch slats
  • Two 15 inch slats

Taking the four 14 inch slats laying them flat together.  Attaching the four 8 inch slats to the top and bottom of the 14 inch slats to the front and the back.  I want my flag to have a front and a back.  If you want to use this as a wall hanger than you can skip the back side.

We will let that sit for 15 minutes.

Paint the front and back all white.  I know the blinds are white, but some are dingy I want to make it a crisp white.

Measure up on one side 8 inches, mark and on the other side measure up 6 inches, mark.

Taking a piece of painter’s tape and place at the marks.  You should have a diagonal stripe.

Cover every other slat with painter’s tape.

I am using Flag Red craft paint to the exposed slats above the diagonal tape.  I gave it 3 coats.  Remove the tape after the last coat before it dries.

Put that aside and let dry.  Grab the two 15 inch slats painting them with blue.  I am using Cobalt Blue craft paint.

Let dry.  Taking some raffia and applying it underneath the red and white stripes.  I applied some power grab to each side under the red and white strips.  Adding raffia strips on the glue.  This will be Uncle Sam’s hair. 🙂

Taking one of the 15 inch blue slats adding power grab to the back.  I placed it on top of the raffia and red and white stripes.

Using a wooden star to trace around on the blue slat.  Painting the stars white.

Giving our little guy a face.  I free hand two eyes, a nose and a smile with a pencil then using craft paint.

To give him a little bow tie I took a piece of ribbon and tied a knot in the center, added a drop of power grab in the lower center to attach the bow.

This is what my Uncle Sam looks like.

Turning it over and doing the same thing with the red and white paint.  Adding raffia in long strips across the slats and then adding the blue slat with painted white stars.

To be able to hang my piece I drilled two holes to the top of the hat.

Taking some strong wire and adding it to the top of my hat.  I thread the wire through the drilled hole wrapped it around a pin.  This will stop the wire from going through the hole when hanging.  I did my wire two ways for you, one to use as a wall hanger and the other way to use on a flag pole like I am doing.

You can cut the wire and make two separate loops to each drilled hole.

Last step will be giving it one good coat of a top clear coat sealer.  Front and back.

Let it dry for 12 hours.

After it dries hang it on your garden pole or wall and enjoy.  Isn’t it the cutest thing….ever?

If you want one and don’t want to create one yourself here is a similar one I found on Etsy →  Uncle Sam.  But making one yourself is so easy and cost you little to nothing to make.

Next up is Ann at  The Apple Street Cottage.  Can’t wait to see what she has for us!

Would you like a Uncle Sam Garden flag?

If you do….. 

PIN THIS TUTORIAL FOR LATER AND SHARE WITH YOUR FRIENDS NOW!!

⇓ PIN THIS ⇓

If you like my blog be sure to click on the LIKE button and SHARE it with your friends! It’s the best way for my blog to grow. I would love for you to be part of my family so sign up to receive my emails. Every time I post a blog I will send you an update email. Also, follow me on Facebook HERE, Instagram HERE and Pinterest HERE. Come by and say Hey!

Stay strong and Blessed ♥

Let’s see what the girls have for us.  Click on their name and I will take you right over to their blogs.

Carol at Bluesky at Home
Jemma at At Home with Jemma
Barbara at French Ethereal
Jodi at The House House
Terri at Decorate and More with Tip
Ann at Apple Street Cottage
Tammy at Patina and Paint
Patti at Pandora’s Box
Katie at Let’s Add Sprinkles