KITCHEN NOOK REFRESH – HUTCH MAKEOVER – WEEK 2

This post may contain affiliate links. Click {{HERE}} for full disclosure.

Hello and welcome to the second week of the One Room Challenge!  In case you missed the first week, don’t worry you can catch up HERE WITH WEEK 1 (The plans and inspirational board).  As always, joining me Niki – Life as a Leo Wife, Teresa –  Through a Vintage Door and Tammy – Patina and Paint, I will have their video post on what they have been working on this week at the bottom of my page.

Well, this week flew by!  I actually did a lot more than I thought this week.  Feels good to check off everything I wanted to accomplish.  Heading into another week with a new ‘To-Do‘ List.

This week I focused on the changes I wanted to make to the hutch.  Also, I finished painting the base of the table, still haven’t tackled the 6 spindle chairs, that will be on my list for the next couple weeks.

First Week’s Progress

The Hutch

Before I start tearing into the hutch, I wanted to show you how it sits prior to this challenge.  Remember my plans, a new color of paint, a new backing and new hardware.

With everything off the hutch, I removed the hutch from the cabinet.

Laying the hutch on the floor front side down, I pried the back off of the hutch with a putty knife.

For a template, I used the old panel, with a pencil I traced around the old panel on to a beadboard.

   

Cutting the straight lines with a circular saw and finished cutting the curvature lines with a jigsaw.

After cutting the pattern out of the beadboard, I sanded the entire board and edges with 120 grit sandpaper.

Placing the new panel down on the hutch to make sure my pattern fit.  It fits like a glove!

I stained the beadboard with Minwax English Chestnut, don’t mind the can, it has been abused over time.

Three coats of stain and 3 coats of poly, with sanding between coats.

Now the back is done, it’s time to work on painting the hutch.  Sanded, cleaned, primed and painted 3 coats, with each coat drying 8 hours and sanded before the next coat.

I let the pieces sit for two days to let the paint cure before attaching the stained beadboard to the back of the hutch with a nail gun.

Since the wood grains are different, the beadboard is lighter even after 3 coats of stain.  But all in all, I still love how it looks.

The Cabinet

Learned a new trick, when filling in drilled holes for handles, use a piece of dowel rod and wood putty to fill in the holes.  Doing this, it doesn’t show any signs of the previous screw holes.

A work in progress!

After the paint had time to cure, I put the hutch on top of the cabinet.

I did save money by using the old hinges, I spray painted them black.  I purchased two handles and two knobs in Lowe’s to replace the stainless still handles that were on there before.

Even though the beadboard isn’t exactly the same stain color, I love how the hutch looks.  Best part?  Before putting things back in the cabinet and drawers I finally purged and organized.

Before

After

This week I also painted the base of the kitchen table.  I will tackle the 6 chairs in the next few weeks.  I hope y’all have a great weekend, I’ll be back next week to catch you up on the kitchen nook.

Check out what my blogging friends have been up to this week…

Tammy – Patina and Paint

Patina and Paint

Niki – Life as a Leo Wife

Life as a Leo Wife

Teresa – Through a Vintage Door

Through a Vintage Door

Follow Decorate and More with Tip!!
↓ To find all of my inspiration ↓
Facebook ◊ Pinterest◊ Instagram ◊ HomeTalk ◊ YouTube

Stay strong and God bless! ♥